Stainless steel rotor pump

The stainless steel rotor pump adopts two synchronously moving rotors, which are driven by a pair of external synchronous gearboxes. The rotors run synchronously in the opposite direction under the drive of the transmission shaft, forming a high vacuum degree and discharge pressure, especially suitable for the transportation of pharmaceutical grade media and corrosive high viscosity media

1. Pipeline System of Stainless Steel Rotary Pump

In stainless steel rotary pumps, the pipeline system is also a very important part, so it is necessary to carefully carry out installation and other work to avoid problems and work normally.

When the stainless steel rotor pump is not working, there should be a sufficient amount of medium left in the pipeline, especially the pipeline connected to the discharge body and suction chamber. In this way, when the pump starts, it can provide lubrication to the sealing device(2) Before installing the stainless steel rotor pump, the pipeline should be cleaned to prevent impurities from entering the pump and affecting its normal operation(3) After the pump is connected to the pipeline, check if there is any external force applied to the pump body. If there is, it should be dealt with in a timely manner. Moreover, it is also necessary to consider whether vibration in the pipeline will cause damage to the pump body

2. Maintenance of stainless steel rotor pump

(1) Stainless steel rotor pump requires lubricating grease for lubrication and maintenance, and it should be done regularly because the lubricating grease is prone to volatilization.

. In addition, for the lubrication of its bearings, it is important to keep them clean and replace them regularly(2) The insulation resistance of the rotor pump also needs special attention. If it is not used for a long time or in a humid environment, then before use, measure the resistance value of the pump winding to see if it is within the specified range. If there is a problem, it needs to be dried and restored to normalFor stainless steel rotor pumps, the above mainly explains their piping system and how to carry out maintenance work, so that everyone can further understand this type of rotor pump and carry out its maintenance work in practice, in order to extend its service life