Maintenance and selection strategy for gear pump equipment

【1】 The maintenance of chemical arc pump equipment is usually based on the operating time of the equipment. Before carrying out maintenance, the equipment should be carefully inspected as follows:

Firstly, check the appearance of the equipment, especially the gear components and exposed parts, to ensure that the equipment does not rust or remains clean

Secondly, thoroughly inspect the equipment gears and confirm in detail whether the components are loose. Also, carefully inspect the shafts, impellers, bearings, etc. to see if there are any signs of wear

If an abnormality is detected, the cause should be analyzed and immediate measures should be taken to repair and maintain it

Thirdly, carefully check the other conditions of the gear pump and supporting equipment, such as ensuring that the oil filter is not blocked, lubricating grease meets the corresponding standards, and supplementing lubricating oil according to the current situation of the oil tank. 4、 Check the electrical system. It is necessary to check the grounding and insulation of the electrical system, and ensure that there are no issues with the vibration, temperature, etc. of the motor

[2] Selection Strategy for Circular Arc Oil Pump Equipment

1. Adhere to Technical Principles

Chemical units should ensure that all functions of the circular arc oil pump equipment meet the requirements. Technical and economic performance are crucial indicators. Only by comprehensively considering these basic principles can the actual needs of use be met, and the reliability of the equipment be ensured to meet the requirements.

2. Following the principle of economy

The ultimate goal of chemical enterprises is to obtain high economic benefits. Therefore, in the process of selecting equipment, economic requirements should be strictly and fully considered, not only considering the cost of purchase, but also considering maintenance and repair costs.

. After analyzing these factors comprehensively, choose the best equipment to meet the needs of chemical production

3. Reliability Principle

The reliability of the operation of the circular arc oil pump equipment is a key indicator to ensure continuous production. Therefore, in the selection of equipment, this aspect should be considered from the perspectives of function, reliability, and maintainability. The equipment should meet all performance indicators before it can meet the needs of temperature, pressure, and other performance of the system.

Equipment with high reliability must ensure its normal operation without any functional damage under any conditions, thus ensuring the normal operation of the entire system and greatly improving the economic benefits of the enterprise